Bow tie DIY
May 10, 2012Hello lovely people! Here's a DIY I got from a friends blog. Hope you try your hands on it!
What do you need?
Fabric
Triangle ruler
Pencil
Scissors
Iron
bobby pin
hand needle
thread
Lets start!
Step 1: Draw two pieces; 30 á 35 by 12 cm and 10 by 4 cm, cut 'em out. (Bow tie 17 by 8 cm 10 by 2cm)
Step 2: Iron the edges 1 cm in.
Step 3: Thread your needle and tie a knot in the end.
Step 4: Fold the fabric in half, mark the middle with the pencil, open it up again.
Step 5: Fold both sides 1 cm over the mark for overlap. Now you have a bow shape.
Step 6: Push through the edge with the needle and loop it one more time to secure.
Step 7: Sew one 1 cm wide till the other-side, do not secure.
Step 8: Pull the thread for the perfect bow shape.
Step 9: Round the thread over the center for a few times and secure.
Step 10: wrap the little piece around the bow
Step 11: Push the needle trough the piece, wrap it around for a couple times and secure.
Step 12: Cut the leftover off
Step 13 slip your bobby pin trough the piece
Step 14: You're done.
Good luck!
Source: fashioncrushh
stay easy/inspired
love
Maudleen
xoxo
9 comments
looove the BOW!
ReplyDeletexx
-S
Ginger and Lace
Thanks sweetie...
DeleteAmazing DIY and your bow turned out really nice!
ReplyDeletex
Thanks sweetie... xx
DeleteLove the bow!
ReplyDeletePlease check out my blog too at Miss Tangerine :)
Thank you... Will sure check it.
DeleteLove that bow...so cute:)
ReplyDeleteGreat DIY!
take a peek at my blog and follow if you like:)
Shubhi's Revels!
Thanks sweetie. Will visit your blog.
DeleteThanks a lot for your nice comment!!
ReplyDeleteTake care and have a lovely day :)